Everything New Mexico Biomedical Services publishes on biomedical equipment calibration in one place: the full service overview, the related services we provide, and the locations we cover.
This is the index for biomedical equipment calibration. If you already know which service you need, go straight to it below; if not, the full overview explains what each one covers.
Every calibration performed produces two numbers that matter: what the device read when we arrived, and what it read when we left. Skipping the first one makes the record useless in an audit, because it removes any way to establish whether the instrument had drifted out of tolerance during the interval it was in clinical use.
Findings are reported plainly, including the ones that mean a device should be taken out of service.
Calibration is the measurement step, not the repair step. A device is compared against a reference standard with documented traceability, the deviation is recorded, and the instrument is adjusted until it reads true across its working range — then the as-found and as-left values are both written down, because the as-found figure is what tells you whether anything treated on that device since the last visit was affected.
Calibration intervals are not arbitrary. They come from the manufacturer's specification, the device's history, and how hard the department runs it. An instrument that drifts twice in a row needs a shorter interval, not the same one repeated, and a technician who does not adjust the schedule is recording a problem rather than solving it.
Work is performed to manufacturer specification and the applicable regulatory standard, and the record says which one was applied.
Every visit produces documentation an inspector can read without a translator: what was done, to what standard, by whom, and when it is next due.
Technicians are qualified for the equipment they touch, and the qualification is on file rather than asserted.
Calibration intervals are not arbitrary. They come from the manufacturer's specification, the device's history, and how hard the department runs it. An instrument that drifts twice in a row needs a shorter interval, not the same one repeated, and a technician who does not adjust the schedule is recording a problem rather than solving it.
Pricing is quoted against a defined scope, and a change to the scope is a conversation before it is an invoice line.
Service records are read at the worst possible moment - after an incident, during an accreditation survey, in discovery. That is the audience they should be written for, which means legible, specific and dated rather than signed off in bulk.
There is no charge for the conversation that establishes whether you need this service at all.
Current developments in biomedical equipment calibration, with sources for further reading.
